Full automatic ultrasonic cleaning machine introduction:

The automatic ultrasonic cleaning machine is a special cleaning equipment designed for workpieces with large cleaning volume, high cleaning requirements and using solvent as cleaning medium. The main production line of the equipment generally consists of 1-2 ultrasonic cleaning tanks, 1-2 hot water rinsing tanks, 1-2 spray tanks, 1 drying tank and other workstations. Its working principle is to use ultrasonic penetration. The mechanical vibration impacts the surface of the workpiece and combines the chemical degreasing and decontamination effects of the cleaning agent to make the surface of the workpiece clean.

The working process is to manually put the workpiece to be cleaned into the cleaning basket, and send it into the main machine of the cleaning machine through the loading and unloading table. The table passes through the drying area, and finally the worker removes the tooling basket. The operation of the equipment is automatic control or manual control, and the operation is simple. Closed appearance, beautiful and elegant structure. Fully automatic production, high cleaning efficiency, consistent cleaning quality, suitable for mass production. The key parts of the electrical control of this equipment are imported high-quality parts, with safe and reliable performance and long service life.

Full automatic ultrasonic cleaning machine features:

1. The equipment is cleaned one by one at multiple stations, and the transmission form of the cleaning part adopts the trolley lifting device to feed the hanging basket for cleaning. The feeding and discharging are automatically conveyed and positioned by the chain, which is safe and reliable in operation and has a long service life.

2. The cleaning rhythm can adjust the cleaning time according to the cleanliness requirements of the cleaning workpiece.

3. According to the characteristics of the products to be cleaned, the ultrasonic wave adopts bottom radiation cleaning, and all areas are guaranteed to have ultrasonic waves, so as to achieve no dead ends and no blind spots. The generator adopts power module power supply and has the function of frequency adjustment, which has achieved the best cleaning effect.

4. Each working tank is equipped with an automatic heating temperature control device.

5. The cleaning tank is designed as a boat-shaped structure, with a sloped bottom design and a sewage outlet, which is convenient for cleaning the bottom of the tank. Equipped with a circulating filter device to ensure the cleanliness of the cleaning liquid. Each ultrasonic tank and liquid storage tank is equipped with a liquid level protection device. The liquid level protection device has the function of protecting the ultrasonic wave, water pump and heating tube when there is a lack of liquid.

6. The equipment is fully automatic, which can prevent errors such as confusion in the cleaning process, delay in cleaning time or advance due to human factors.

7. The equipment is fully automatic controlled by PLC and touch screen, and has a fault alarm function to ensure that the equipment is protected from damage and timely troubleshooting. The overall design is beautiful, easy to operate, safe and reliable.

8. The pipelines of this equipment are individually circulated and filtered for each tank through manual ball valve switching, and the liquid in the tank can also be pumped and circulated through the ball valve switching to ensure that the cleaning liquid in the tank is always kept clean.

Full automatic ultrasonic cleaning machine process flow:

Cleaning process: feeding → ultrasonic rough washing → ultrasonic fine washing → hot water rinsing → cold water rinsing → pickling → cold water rinsing → cold water rinsing → spraying → hot water rinsing → hot air drying → blanking.